Hplip can't see my printer, but lsusb can what can I do to get it to be found manually? I can not discover what to enter in the manual discovery options and what format to enter them in.
output from my terminal console is as follows:
robert@phenom:~$ sudo hp-setup -i
HP Linux Imaging and Printing System (ver. 3.14.3)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------
Num Connection Description
Type
-------- ---------- ----------------------------------------------------------
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)
Enter number 0...1 for connection type (q=quit, enter=usb*) ? 0
Using connection type: usb
error: No device selected/specified or that supports this functionality.
robert@phenom:~$ lsusb
Bus 001 Device 005: ID 03f0:4117 Hewlett-Packard LaserJet 1018
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 002 Device 002: ID 0c45:6128 Microdia PC Camera (SN9C325 + OM6802)
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub