I have a new PC (also HP) which is running Windows 10 my printer was working fine on my old PC (Windows 7) but since changing to the new PC I have had problems with my HP Solution Center. I only get scan options no print options at all. I have tried uninstalling and reinstalling the printer,drivers and the HP software, basically started from scratch but still have had no luck getting printing options on the HP solution center. The printer does print but I have to do it through windows or other software. Am I missing something or is the printer being and older model not compatible with the fabulous Windows 10 😞
↧
HP Solution Center
↧
HP Officejet 4580 Tri-Color Cartridge level shown as very low when it s full
Hi,
my problem is as mentioned in the title that my printer software reports, that the tri-color level is low, when I just refilled all the colours. I have uploaded a few pictures to provide additional information:
1. Black Cartridge removed, flap closed.
2. Black Cartridge removed, flap opened.
3. Both Cartridge inserted, flap closed.
4. Result of a printer test, descirbed here: http://www.fixya.com/support/t9834134-check_ink_levels
First of all, I know that I use non-hp ink. However, the printer worked fine for some time with this ink. Does anyone know how to solve the problem? Is it because I used non-hp ink and if yes can I adjust the printer to use the other ink?
Best Regards
↧
↧
photosmart 8150 windows 10
w10 1903 originally installed via Insider Preview latest update applied. Plug and Play says HP 8150 setup complete, ready for use. Device manager shows Other devices/Unknown device and no printers, Settings does not show 8150. HP Smart app continuously tries to connect to printer on USB.
↧
install driver
hELP ME TO INSTALL DRIVER IN LAPTOP
↧
Printer software not installing but printer shows up on network
Scan to computer didn't work so I uninstalled the software. The Print and Scan Doctor shows the printer as not installed. I have downloaded the software and attempted to install it wirelessly several times to no avail. I keep getting a pop up saying Unsuccessful Network Installation - The printer was unable to be installed over the network. The IPv4 Address, Default Gateway and Primary DNS Server have identical configurations and the Subnet Mask is 255.255.255.0.
Strangely enough I can use the HP Smart App on the desktop without any problem.
↧
↧
CD for OLD HP color printer
Does anyone know the whereabouts of a CD for loading the drivers for
the HP Color Pro 2000C? The driver may be downloaded from the HP
site. However this driver does NOT include the "Tool Box". The tool box
provides some functions that are not included in the downloaded driver
package. Will trade for a copy of the CD for the Color Pro 2500C.
Thank you.
↧
need instructions for cleaning hp 6600 printer head
keep getting msg about problem with printer or ink system. need instructions for cleaning printer head.
↧
Update printer driver
Received a notice from HP to update printer driver - have tried unsuccessfully to complete and now I am unable to print photos - no options other than One Note
↧
Missing Paper Types with Printer on Server 2016
We have a LaserJet 4250 that was shared off of a Windows 2008 server. On the 2008 server, when I look at the printing preferences/paper type pull down menu I get options for letterhead, preprinted, bond, etc. On the Server 2016 machine I have the same printer setup using the driver "HP LaserJet 4250 PCL6 Class Driver". When I look at the printing preferences for this driver there are no paper types listed. On the end user's computers they only get the trays offered for paper types. Further, there seems to be no setting for the envelope feeder installed on the printer in the 2016 driver. How can I get these paper types back?
↧
↧
Instant ink says I am enrolled, the printer says I am not
Instant ink says I am enrolled, printer says I am not, so can't print from new cartridges. Online support so far crap.
↧
Officejet pro 8710 last page pause at the half
Hello, I have an officejet 8710 wich when i print documents of 2-3 pages and more the last page pause at the half for a few seconds. I have tried to update and check the configuration but I don't know what is the problem, I did a factory reset, I saw that many have this problem but it seem to be with MAC and I have a windows 7 and before with the 8610 i didn't get this problem.
↧
Keep getting "filter failed" when trying to print out
There is a definite issue with the HP CP1025NW printer not being able to print from macOS 10.14.x. I am also getting the "Stopped - Filter failed" error when trying to print via Ethernet to the printer, and also by USB. I have followed the whole thread and followed all the steps by resetting the Mac print system and installing the latest available drivers for the printer available from HP support. Where this printer is located is in a basement where our shipping office is located with WiFi not available. I also would like to see that HP works on the issue with the printer not being "compatible" with later versions of macOS.
↧
WHY PRINTER ARE GET C ERROR
MY PRINTER GETTING ERROR WITH C
↧
↧
Photosmart HP 8450 stopped working with updated Windows 10
My printer HP Photosmart 8450 stopped working after an automatic update of Windows 10, it has worked perfect until now. It says it doesn't work due to error with USB3.0. I have tried to uninstall drivers etc without any sucess.
I have used a HP Probook 450 G3 for interfacing with the printer.
↧
What Pen is compatible with Hp Pavilion X360 Convertible? (Model: 14-ba00ne)
I'm looking for an active pen/stylus that is compatible with my laptop. Nothing is listed about this model. Any help please?
↧
all in one not working
The all-in-one has been not scanning often in the last several months. Now it will not scan or copy
↧
Having problem with my printer HP ENVY 5020
When I print out a document the printer print out only White papers
↧
↧
twenty seconds timeout in UPS driver because of port 3910
Hello,
I have a windows print server which serves the same UPS driver to all HP printers.
The older cm6030f are printing fast, the newer e87640 have a timeout of twenty seconds,
before the printjob is send to the print server.
The Timeout:
If I click in notepad,word or in acrobad on "print" the GUI hangs. Word is writing "Word not responding"
and writing "Word is preparing a background print job". After ~20 seconds the job is send.
The Analysis:
I have analysed it with procman.exe. The trace shows that the UPS driver on the client is
connectings "e87640.printers.mynet.de" on port 3190.
This blocks for 20 seconds, after 20 second procman "continues" with logging.
The trace for the cm6030 does not show this TCP connect.
The network
The printer is in its own subnet and cannot be reached directly.
Any attempt to connect to the printer is silently dropped by the firewall, this explains the timeout.
The Question:
How can I disable the TCP connection to e87640.printers.mynet.de:3190 in the printer driver?
Most likely it must be configured on the printer, because the cm6030f does not show the
behaviour with the same UPS driver and Print server as the e87640.
↧
My computer won't print to my HP Officejet Pro 8620 on WiFi network, but ok with USB connection.
My printer works with other devices printing via the same WiFi network, but getting error printing from this laptop.
↧
last update firmware for hp officejet 7740 block old cartridges
Hi guys we have a big problem.
Have bought 11cartridges for hp 7740 but is impossible use it after the upgrade of firmware 16.04.2019 number 1912A.
So we cant use old toner.
Can downgrade the firmware? how can use it?!?!?
help please
↧